Summer excavator air conditioning tips

Summer has already begun, if the air conditioning is not cold, it is a very troublesome thing, as a customer, that is, there is no special type of machinery and equipment, there is no special air conditioning maintenance skills, then we are at a loss? Xiaobian to tell you.

Common problems of air conditioning and heating wind conversion:

1, to turn off the heating air pipe diligently, two heating air inlet valve, otherwise when the air conditioning is turned on, the air conditioning is still hot, in the long run will continue to damage the air conditioning system software, in addition, it is suggested that as far as possible two heating air inlet valve must be closed, as shown in the figure below;

2. Clean up the condenser radiator. When the condenser is not good in heat dissipation due to dirty blockage of heat pipe, the actual effect of air conditioning refrigeration is not very good.

3. Check the tension and tightness of the air conditioning transmission belt and whether the transmission belt is cracked and brittle, and carry out dismantling if necessary. Drivers of air conditioning

4, clean-up, inside the room without air conditioning application, many drivers will bridge Windows open to carry out the engineering construction, this cause driving indoor dust deposition more as far as possible, just began after the application of air conditioning, Windows closed, fly ash and other pests in circulation system inside the room, must reduce the physical and mental health, comfortable and Therefore, it is necessary to clean up the filter screen of the cab and air conditioning blower motor.

5, after the implementation of the matters, and then check the air conditioning refrigeration system software is not all normal operation, start the equipment, open the blower motor, open the air conditioning refrigeration power switch, check whether there is a wind blowing, determine the end, to turn off the air conditioning and then rest the fire, to avoid electrical equipment damage.